Details
MJK0882 1 - JCMCO JC-RT-16H Tablet Press
Model: JC-RT-16H
Serial Number: 880210
Manufacture Date: Feburary 1999
Product Specifications:
Type of tooling: EU “D”IPT”D”
Tablet Diameter Max: 25.4mm (1”)
Production Capacity (tablets per hour): 17,000- 69,000
Revolutions of turrent/min: 16-72
RPM Depth of fill adjustable to : 19mm (0.75)
Maximum Operating Pressure: 10,000kgs (22,000lbs)
Maximum Pre- pressure: 3,000kgs (6,600lbs)
Diameter of die: 38.1
Height of die: 23.81mm (0.9375”)
Nominal diameter of punch body: 25.4mm (1’’)
Turret P.C.D.: 253mm
Power Consumption: 3 HP (2.2kw)
Machine Dimensions: 850 x 790 x 1,710mm (not including hopper)
Net weight: 1,200 kgs (2646lbs)
Product Features:
Accurate tablet compression in two stages
Tabletting compartment separated from drive mechanism
Easy maintenance & cleaning Meets GMP
Efficient medium size production runs, with capacity up to 100,000 tablets per hour;
Product Description:
Cam Design & Lubrication: A central lubrication system supplies oil continuously to lower punches, while grease applied manually lubricates upper punches. The ejection cam is manufactured from special tool steel for extended life, while a double sided lifting cam is provided.
Upper & Lower Punch Seals: The scrapers seals for the upper punches protect tablets from oil drip, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.
Direct Rotation of Turret: Direct rotation of the turret by the main shaft reduces the noise level; it provide maximum protection to the gears and the drive system.
Pre-Compression and Main Compression: High pre-compression of 3000 kgs insures trouble-free processing of difficult granules. It helps in the direct compaction of materials, reducing lamination and capping. Pressure rollers are made of special tool steel that ensures uniform pressure application. The double bearings are fitted, which minimize wearing of the rollers.
Feeding Material: The feeder support platform is preset at the factory to the correct height and should not require adjustment. Quick release clamping screws allows removal of the feeder for cleaning and tool changeover without the need to disturb the feeder platform setting.
Mechanical Feeder: The two chambers feeding system has been improved further. It is driven from top by a variable speed motor. The unit can be assembled or disassembled easily.
Cleaning and Tool Changeover: The detachable panels can be removed easily, which reveal the entire bottom punch cams. This allows easy removal of the bottom punches. Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Vancouver, Washington
Skidding: $625
Load Out: $520
