1 Used Kanebo Tablet inspection machine
Uses Nikon AF Nikkor 50 mm lens
Overview: Tablet fed to the hopper, are transferred to teh flow control turntable by the vibratory feed. Tablets are properly aligned in a single line and sent o the inspection subsystem.
At the inspection subsystem, tablets are transferred by the disc conveyor unit to pass through side-1/2 and side 3/4 lighting units for circumferential side inspection; and through face-1 and face-3 lighting units by the 1st and 2nd belt conveyor units for face and back inspection.
While each tablet passes through lighting units, images are processed for individual judgment and individual judgments are then complied for overall judgment. Based on the overall judgment, defective and acceptable tablets are automatically separated by the rejector unit.
Power Supply: AC 200V 3-phase, 50/60 Hz
Applicable Tablets: Non-coated, film coated, sugar coated tablets. Tablets with printed mark on one or both sides, scored tablets, engraved tablets, circular tablets, other type of tablets(oblong, oval, etc.)
Tablet Size: Circular size: 5-12mm in diameter and 2-8mm in thickness Non-Circular tablets 5-12mm width, 2-8mm thickness, 5-21mm length
Inspected Items: Dirt: foreign matter, dirt, scratch. Shape: dimensions, crack, deformation. Chip: chipped edge. Printed mark: scratchy mark, blurred mark, no mark. Color: different color, discoloration, blotches, peeling of coating.
Inspection area: Face: 1 Side: 4
Accuracy: Detection of defects equivalent to a 50um square or later black speck
Processing capacity: Circular tablets 2000-3600 tablets/min. Non-circular tablets 800-3000 tablets/min
Location: City of Industry, CA