*** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48

***SOLD*** 1 Used - Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System Volume ranges from 1oz to 16oz Presently set for 4oz Diameter is about ¾” on the nozzel head Also Includes Holding Tank and FS-A Accumulation Table 48" Diameter Features: THE MODEL “VOL-A” VOLUMETRIC PISTON FILLER COMES EQUIPPED WITH THE FOLLOWING FEATURES AS STANDARD EQUIPMENT: 7’6” long S.S. Frame Variable Speed Conveyor (110V, 1 Phase). No Bottle – No Fill. Automatic Bottle Indexing System-stainless steel construction and completely accommodates a wide range of container shapes and sizes. Both bottom-up fill and non-diving nozzles (adjustable). Totally programmed microprocessor control for all filling systems. Nema 4 (wash-down control panel). Independently adjustable trimming of pumps to fine-tune each piston pump. Dual speed controls giving separate adjustment capabilities for the aspirating and discharges strokes depending upon products being filled. Portable, self-contained unit complete with stainless steel support table. Master control and hand wheel permitting volume adjustment of all pumps by a single turn of the calibrated wheel assuring fast, repeatable settings between changeovers. Totally adjustable, pneumatic, automatic cylinder bottle gating system. Left to right conveyor travel is standard.  Stainless steel nozzle rack fully adjustable for spacing of nozzles from one to four nozzles depending upon container size. All stainless steel guarding and covers. Available with either standard check valve type pistons or patented exclusive shuttle valve type pistons.  Air filter/regulator and air supply switch. Size: - Base Crated Weight: 500 lbs - Crated Dimension: 4’x4’x6’8” W Air-Electrical: -120V, 1 Phase, 60 Cycle - Air: 2-3 cu/ft per min.  90psi. Ideal For: All viscous and highly accurate filling applications.  Excellent with viscous products. Ideal for applications such as: reduced speeds, short production runs, limited space and trial runs where precision filling of a wide range of product is required. HOLDING TANK : Portable on casters, and fabricated of stainless steel, this unique design eliminates product waste. Standard 30 gallon capacity.  Dimensions16" L x 33" W x 21" D FS-A Accumulation Table 48" Diameter 72" L x 52" H Ideal For: • Ideal for accumulating product at the end of the production line. Air-Electrical: -110V, 1 Phase, 60 Hz (Nema 12) Size: - Crated Machine Weight: 450lbs - Crated Shipping Dimension: 6’x4’x5’ 
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
Image for *** SOLD*** MJK0662 Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System FS-U 48 thumb
image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view image for print view

***SOLD*** 1 Used - Kaps-All Fully Automatic Compact Volumetric Filler 4 Head System

Volume ranges from 1oz to 16oz
Presently set for 4oz
Diameter is about ¾” on the nozzel head


Also Includes Holding Tank and FS-A Accumulation Table 48" Diameter

Features:
THE MODEL “VOL-A” VOLUMETRIC PISTON FILLER COMES EQUIPPED WITH THE FOLLOWING FEATURES AS STANDARD EQUIPMENT:
7’6” long S.S. Frame Variable Speed Conveyor (110V, 1 Phase).
No Bottle – No Fill.
Automatic Bottle Indexing System-stainless steel construction and completely accommodates a wide range of container shapes and sizes.
Both bottom-up fill and non-diving nozzles (adjustable).
Totally programmed microprocessor control for all filling systems.
Nema 4 (wash-down control panel).
Independently adjustable trimming of pumps to fine-tune each piston pump.
Dual speed controls giving separate adjustment capabilities for the aspirating and discharges strokes depending upon products being filled.
Portable, self-contained unit complete with stainless steel support table.
Master control and hand wheel permitting volume adjustment of all pumps by a single turn of the calibrated wheel assuring fast, repeatable settings between changeovers.
Totally adjustable, pneumatic, automatic cylinder bottle gating system.
Left to right conveyor travel is standard. 
Stainless steel nozzle rack fully adjustable for spacing of nozzles from one to four nozzles depending upon container size.
All stainless steel guarding and covers.
Available with either standard check valve type pistons or patented exclusive shuttle valve type pistons. 
Air filter/regulator and air supply switch.
Size:
- Base Crated Weight: 500 lbs
- Crated Dimension: 4’x4’x6’8” W

Air-Electrical:
-120V, 1 Phase, 60 Cycle
- Air: 2-3 cu/ft per min.  90psi.
Ideal For:
All viscous and highly accurate filling applications.  Excellent with viscous products.
Ideal for applications such as: reduced speeds, short production runs, limited space and trial runs where precision filling of a wide range of product
is required.

HOLDING TANK : Portable on casters, and fabricated of stainless steel, this unique design eliminates product waste. Standard 30 gallon capacity. 

Dimensions16" L x 33" W x 21" D


FS-A Accumulation Table 48" Diameter
72" L x 52" H
Ideal For:
• Ideal for accumulating product at the end of the production line.
Air-Electrical:
-110V, 1 Phase, 60 Hz (Nema 12)
Size:
- Crated Machine Weight: 450lbs
- Crated Shipping Dimension: 6’x4’x5’