Details
1 Used YNJP-240C Automatic Liquid Capsule Filling and Sealing System
Model: YNJP-240C
Volts: 380
Hz: 50
Phase: 3
Power: 3.5 Kw
Dimensions: 810 × 945 ×1930 mm
Machine weight: 700kg
Motor power: 3.5kw
Output: 14400 capsules/h
Capsule size: 00#～2#
Capsule using rate: ≥ 99.5%
Noise index: ≤ 75dBA
Filling Accuracy: ≤±3% on 300mg or higher filling volume
Vacuum degree: -0.02～-0.06 MPa
Compressed air: Consumption：3m 3 /h Pressure：0.3~0.4MPa
Water volume: 250L/hour
Enter pipe inner-diameter: 20mm
Waterspout inner-diameter: 27mm
Working temperature: 21℃ ± 3℃
Working relative humidity: 40～55%
Product form: Oil-based liquid
Control system: PLC control and HMI
Material: Spare part contact with medicine adopts superior S.S 304 & GMP compliant material
Criterion: Comply to GMP completely
Tooling the machine comes with: 0 and 1
General Info:
An automatic capsule liquid-filling machine is designed for liquid products to be filled with hardshell capsule filling machines. Empty capsules are loaded into the capsule hopper where they are fed into the magazine. Capsules
initially enter the magazine un-oriented. From the magazine, the capsules enter the sorting block where they are properly oriented (smaller end on the bottom). The capsules are then separated by a vacuum. After the inspection station, the capsule body is filled with a liquid product, any cavities on segments with capsule body missing will not be filled with product to prevent liquid pollution and product wasting. Then non-separated capsules are rejected on the rejection station and capsules will be closed before discharging. A liquid capsule banding machine is attached for sealing to prevent leakage.
Capabilities
Central turret for 10-station with upper/lower segments.
Capsule orienting, placing and separating system
Missing capsule inspection with fibre sensor, pump stop filling for cavities with capsule
missing.
Defective capsules rejecting system
Finished product-ejecting.
Four protective doors with synthetic glass enabling operator to see the processing condition
Interlocking protection connected with protective door to avoid machine running while doors
are open
Electronic protection against overload
Grounding protection for eliminating risk of electric shock to operator
High quality ceramic pump
Machine frame made of stainless steel, mounted on rubber shock pad.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: San Diego, CA
